Now booking fall roof inspections. Get your roof checked before snow and plan next season's coating work. Book free inspection →
Example of blown-in fiberglass insulation covering a home attic floor. Stock photograph, not a Revive job.
Blown-in attic insulation

Blown-In Attic Insulation: Fiberglass & Cellulose for Homes and Commercial Buildings

A thin, settled, or patchy attic is one of the biggest sources of heat loss in a Montana building. We air-seal the attic floor, keep the vents open, and blow in fiberglass or cellulose to the depth your building needs, in homes and commercial buildings across western Montana. Your insulation estimate is free.

Why blown-in

The fastest way to add a lot of attic insulation

Loose-fill insulation is blown through a hose into the attic, where it settles into an even blanket that fills around joists, wiring, and framing. It's the most practical way to bring an under-insulated attic up to today's levels, and it can usually go right over the insulation that's already there.

The part most people skip is the part that matters most: air sealing. Before we add insulation, we seal the gaps where warm air leaks from the building into the attic. Then the new insulation can do its job.

  • Even coverage. Blown insulation fills around framing and obstructions that batts leave gaps around.
  • Goes over what you have. If the existing insulation is dry and clean, we top it up instead of tearing it out.
  • Air sealing included. Top plates, light fixtures, plumbing and wiring holes, chimneys, and the attic hatch.
  • Vents kept open. Baffles at the eaves keep insulation from blocking soffit vents, so the attic can breathe.
  • Lower heating bills and a more comfortable building. Fewer cold rooms and drafts. We won't promise a savings number because every building is different.

Homes & commercial buildings

Get your free insulation estimate

Rather talk? Call or text 406-210-3168 · Mon–Fri 8 AM–5 PM MT

Your insulation estimate is free, with no obligation. We use your details only to contact you about your building.

Fiberglass vs. cellulose

Two good options. We'll help you choose.

Both are proven loose-fill attic insulations. The right one depends on your attic, what's already there, and your budget.

Blown-in fiberglassBlown-in cellulose
What it isLoose glass fibersShredded, mostly recycled paper treated for fire and pest resistance
WeightLight, easy on older ceilingsDenser and heavier
Air movementAir moves through it more easily, so air sealing first is essentialDenser fill slows air movement through the insulation (air sealing still comes first)
MoistureDoesn't absorb waterCan absorb moisture if there's a roof leak, so leaks get fixed first
SettlingHolds its loft wellSettles some over time; we install enough to allow for it
Good fit forMost attics, especially over lighter ceilingsAttics with lots of framing and gaps, topping up older insulation
Homes & commercial buildings

Who we blow in insulation for

Houses & cabins

Attics over living space, older homes with a few inches of settled insulation, additions, and cabins being turned into year-round homes.

Garages & shops

Attics over heated garages and shops with a ceiling, so the heat you pay for stays down where you work.

Commercial buildings

Offices, churches, schools, retail, and other commercial buildings with an attic over the ceiling, scheduled around your hours.

What's included

How we insulate an attic

  1. Attic check

    We measure the insulation you have, look for roof leaks, water stains, frost, mold, pests, and blocked vents, and check where bath fans and dryer vents end up.

  2. Fix problems first

    Roof leaks get repaired, fans get vented outside, and anything that would trap moisture gets dealt with before insulation goes in.

  3. Air seal

    We seal the gaps between the building and the attic: top plates, fixtures, plumbing and wiring holes, chimney and flue gaps (with the right fire-safe materials), and the attic hatch.

  4. Baffles & clearances

    Vent baffles at the eaves keep the soffit vents open, and we keep the required clearances around chimneys, flues, and fixtures.

  5. Blow & verify

    Insulation is blown to an even depth across the attic, checked with depth markers, and the hatch is insulated and weatherstripped. Then we clean up.

Roofers who insulate

Why the roof and the attic belong together

The attic is where the roof and the house meet. Most of the winter problems we see on Montana roofs start there: heavy icicles, ice dams, frost on the underside of the roof deck, and moldy sheathing all come from warm, moist air getting into the attic and the roof not being vented to carry it away.

Because we're roofers, we look at the whole system: the insulation, the air leaks, the intake and exhaust vents, and the roof itself. That means you get one honest recommendation instead of an insulation crew that never looks at the roof, or a roofer who never opens the attic hatch.

Getting a new roof? It's the best time to fix attic ventilation and insulation. See residential roofing or the guide on ice dams on Montana homes.

For walls, rim joists, crawlspaces, metal buildings, and vaulted ceilings with no attic, spray foam insulation is usually the better tool.

What blown-in insulation looks like

Examples of attic blown-in insulation

We don't yet have photographs of our own blown-in attic jobs on this page. The photos below are licensed stock examples of blown-in insulation in attics. They are not Revive jobs.

Example of blown-in fiberglass insulation covering a home attic floor. Stock photograph, not a Revive job.
Blown-in fiberglass covering an attic floor. Stock photo by Jason Dale, Wikimedia Commons, CC BY-SA 3.0. Brightened; Revive logo added. Not a Revive job.
Example of blown-in cellulose insulation in an attic. Stock photograph, not a Revive job.
Blown-in cellulose in an attic after installation. Stock photo by photos Grenier ouate, Wikimedia Commons, CC BY-SA 3.0. Brightened; Revive logo added. Not a Revive job.

Blown-in insulation across western Montana

We insulate homes, shops, and commercial buildings across western Montana, including Missoula, Kalispell, Whitefish, Columbia Falls, Bigfork, Lakeside, Polson, Ronan, Plains, Hot Springs, Thompson Falls, St. Regis, Superior, Libby, Eureka, and the Bitterroot Valley. Don't see your town? Call or text 406-210-3168.

FAQ

Blown-in insulation FAQ

Fiberglass or cellulose: which is better for my attic?

Both work well when they're installed to the right depth over a sealed attic floor. Loose-fill fiberglass is light, doesn't absorb water, and holds its loft. Cellulose is made largely from recycled paper treated for fire and pest resistance; it's denser, settles into gaps around framing, and helps slow air movement through the insulation. We'll recommend one based on your attic, what's there now, and your budget.

Can you blow new insulation over what's already in my attic?

Usually, yes, if the existing insulation is dry and clean. If it's wet, moldy, full of rodent droppings, or there's an old roof leak, that gets dealt with first. If the insulation looks like old vermiculite, we stop and recommend testing before anyone disturbs it.

How much insulation should my attic have?

Montana's cold climate calls for a lot more attic insulation than many older homes have. The target depends on the building code and energy guidance for your area and the type of insulation, so we'll measure what you have and tell you how much to add to reach the recommended level.

Why do you air seal before blowing insulation?

Loose-fill insulation slows heat, but it doesn't stop air. Warm air leaking through gaps around light fixtures, top plates, plumbing and wiring holes, chimneys, and the attic hatch carries heat and moisture into the attic. Sealing those first makes the new insulation work much better and helps prevent frost, mold, and ice dams.

Do you do blown-in insulation in commercial buildings?

Yes. Offices, churches, schools, retail buildings, and other commercial buildings with an attic over a ceiling are good candidates. We plan the work around your schedule and keep the work area contained.

Will blown-in insulation help with ice dams and icicles?

It's often a big part of the fix. Ice dams form when heat escapes into the attic and melts snow on the roof. Air sealing, adding insulation, and keeping the eave vents open with baffles keeps the roof deck colder so snow doesn't melt and refreeze at the edge.

Is the attic insulation estimate free?

Yes. We'll check the attic and give you a written insulation estimate for free, with no obligation.

How long does a blown-in attic job take?

Most house attics are done in a day, including air sealing and cleanup. Larger commercial attics take longer. We'll give you a timeline with the estimate.

Free insulation estimates

Is your attic costing you money?

Tell us about your home or building. We'll check the attic, the air leaks, and the ventilation, and give you a clear recommendation and a free, no-obligation estimate.

Before you go

Your first commercial roof inspection is free.

Find out whether your roof can be restored instead of replaced. No obligation.

Schedule My Free Inspection406-210-3168