
Roof Repair in Thompson Falls, MT
Snow load, deep-cold cracking, and freeze-thaw damage are what we see most on Thompson Falls roofs. We find where the water gets in and fix the cause.
Roof leaking right now? We take emergency calls and messages 24/7. Call or text 406-210-3168.
- First roof inspection free
- Leaks, storm & hail damage
- Homes & commercial buildings
- Based in Plains, Montana
A roofer who fixes the cause, not just the stain
Thompson Falls is the Sanders County seat, named for explorer David Thompson, who built the Saleesh House trading post here in 1809. At about 2,619 feet, Thompson Falls gets about 15 inches of snow and about 22 inches of total precipitation in an average year, going by the Thompson Falls weather station, and temperatures there have ranged from -25°F to 107°F. On Thompson Falls roofs we look first for snow load, deep-cold cracking, and freeze-thaw damage.
Thompson Falls at a glance
- County: Sanders County, Montana
- Population: 1,336 (2020 census)
- Elevation: about 2,619 feet
- Area: the Clark Fork Valley
- From Plains: about 26 road miles
- Average snowfall: about 15 inches
- Average precipitation: about 22 inches
- Nearby towns we also cover: Belknap, Haugan, Saltese, De Borgia, Weeksville
Call or text 406-210-3168, Mon–Fri 8 AM–5 PM MT.
Homes & buildings
Get your roof repair looked at in Thompson Falls
Rather talk? Call or text 406-210-3168 · Mon–Fri 8 AM–5 PM MT
Our work near Thompson Falls
These are real jobs, nearest to Thompson Falls first. Projects were led by Sam Hostetler, some before the Revive name.
- Cabinet manufacturing plant in Post Falls, ID (about 75 miles away): TPO membrane repairs.
- Grain silos in Grangeville, ID (about 120 miles away): concrete roof restored with coating.
- Boat manufacturing plant in Colville, WA (about 135 miles away): metal roof leak repairs and coating.
What Thompson Falls weather does to a roof
The damage we see most on roofs in Thompson Falls and the Clark Fork Valley, and what we check for.
About 22 inches of precipitation
Thompson Falls gets about 22 inches of precipitation a year at the local station. Long wet stretches in the Clark Fork Valley find cracked pipe boots, worn flashing, and clogged gutters.
Heavy, wet snow
Snow averages about 15 inches a year in Thompson Falls, but it often comes heavy and wet, slides off metal roofs in sheets, and tears at gutters and vent pipes.
Record low of -25°F
The Thompson Falls station has recorded -25°F. Cold snaps crack old sealant and shingles, and the damage tends to leak once the rain returns.
Storms along the Cabinets
Thompson Falls sits next to the Cabinet Mountains. Summer storms off the mountains can bring hail and gusts that lift shingle edges and ridge caps.
Thompson Falls in the rain
With about 22 inches of precipitation a year, Thompson Falls gets more precipitation than the eastern Montana towns we serve. Gutters and valleys on Thompson Falls homes need to stay clear so water can leave the roof.
Weather data: NOAA 1991–2020 normals, Thompson Falls station: about 15 inches of snow and about 22 inches of total precipitation in an average year; record low -25°F, record high 107°F.
Thompson Falls buildings, permits, and snow loads
Homes along the Clark Fork
The town sits beside natural falls on the Clark Fork. Homes near the river and under the trees see moss and debris that hold water on the roof.
Businesses in town
Commercial buildings in Thompson Falls often have low-slope roofs that leak at drains, scuppers, and wall flashing.
Blue Hawks country
Thompson Falls schools and other public buildings have larger roofs. Seams and drains need checking before the wet season.
Buildings near the state park
Thompson Falls State Park is 2 miles northwest of town. Cabins, shops, and homes out toward the park sit under trees that drop needles into valleys and gutters.
Thompson Falls is not on the state's list of certified local building programs, so commercial building permits there come from the Montana State Building Codes Bureau. We check permit needs with that office before larger work.
Montana leaves snow loads to the building official, with a 30 psf minimum design roof snow load, which matters in Thompson Falls when a recover or new rooftop unit adds weight.
Sources: Montana certified building programs · ARM 24.301.146 (snow loads).
Roof systems we repair in Thompson Falls
From screw-down metal to TPO and spray foam, these are the roof systems we repair around Thompson Falls.
- Metal roof repair. loose screws, open laps, and rust on Thompson Falls shops and metal buildings.
- TPO roof repair. open seams, punctures, and pulled flashing on Thompson Falls commercial roofs.
- Membrane roof repair (EPDM and single-ply). EPDM rubber and other single-ply seams, edges, and boots.
- Spray foam roof repair. damaged foam and worn coating, repaired and recoated.
- Roof leak detection. tracing water in Thompson Falls buildings back to its source; paid moisture scans for big roofs.
- Flat roof repair. PVC, modified bitumen, and built-up roofs, drains, and ponding water in Thompson Falls.
- Roof restoration and roof coating. silicone or acrylic coating over a sound Thompson Falls roof instead of tear-off.
That includes commercial metal roof repair on standing seam and screw-down panels, rubber roof repair on EPDM, and recoating worn elastomeric and spray foam roofing.
Roof Restoration & Coatings in Thompson Falls
When the deck is sound and the roof is mostly dry, a roof restoration repairs the leaks and seals the surface with a roof coating instead of a tear-off. We see good restoration candidates on Thompson Falls buildings like homes along the Clark Fork and businesses in town. That applies across Sanders County and the Clark Fork Valley.
After hail in Thompson Falls, restoration starts by repairing the damaged areas. The coating then cures into a seamless layer over seams, fasteners, and penetrations.
Learn more about restoration
Help for leaking and storm-damaged roofs in Thompson Falls
- Roof leak repair. A leaking roof in Thompson Falls gets traced to where the water actually comes in, often a flashing repair or a failed boot, before anything is patched. Leak service calls start at $250, applied to the repair if you hire us.
- Hail, storm, and wind damage. Hail damage roof repair in Thompson Falls starts with a look at dented panels, cracked vent caps and skylights, and bruised membrane.
- Emergency roof repair. Emergency roof repair for homes and commercial buildings in Thompson Falls: We take emergency calls and messages 24/7. When it's safe, a temporary tarp or leak stop protects the building until a lasting repair.
- Winter leaks and ice dams. For ice dam removal, call or text and we'll tell you honestly what is safe on your roof. When snow melts on a warm roof and refreezes at the cold edge, water backs up under the roofing, and we repair that damage on Thompson Falls buildings.
- Roof inspection. A roof inspection for a Thompson Falls building covers seams, flashing, penetrations, drains, and the edges.
Finding the leak and fixing it
How we trace a leak on a Thompson Falls roof
A stain on the ceiling rarely sits right under the leak. Water follows the decking and framing downhill before it drips. So we start at the places water gets in most often: pipe boots, vents, chimney and wall flashing, valleys, skylights, and nails or screws that have backed out.
Everything we find gets marked and photographed, so you can see it for yourself. You get a written quote for the specific repair.
How a roof repair works, step by step
- Call, text, or send the form. Tell us what you're seeing and where.
- Free first inspection. We check the surface, seams, flashing, drains, and edges and take photos.
- Written quote. The specific fix and its cost, in plain language.
- The repair. We fix it, clean up, and send photos of the finished work.
Who we work for in Thompson Falls
Homes and cabins
Residential roof repair in Thompson Falls: leaks, storm damage, flashing, and worn roofs on houses, cabins, and garages. Revive manages the job. Installation is done by roofing subcontractors we choose and coordinate, held to our standards.
Commercial and ag buildings
Flat, low-slope, and metal roofs on shops, offices, retail, churches, schools, and ag buildings around Thompson Falls: seams, curbs, drains, fasteners, and storm damage.
When a repair is the honest answer
A repair makes sense when the damage is in one area and the rest of the roof still has life left. A torn pipe boot, one slope of wind damage, or failed flashing at a wall should be repaired, and we'll tell you so.
When restoring or replacing makes more sense
If the shingles are brittle, curling, or shedding granules across the roof, or the decking is soft in many places, patching is money spent twice. We'll show you photos and explain why. On metal roofs there's often a middle option: repair the problem areas, then restore the surface. See coating vs. replacement.
What changes the cost of a roof repair
- How much is damaged and how many slopes or roof sections it touches.
- Roof type: shingle, standing seam or screw-down metal, membrane, or coated.
- Pitch, height, and access, which set the safety setup.
- Wet or soft decking that has to be replaced under the damaged area.
- Flashing work at walls, chimneys, skylights, curbs, and valleys.
- Season: some repairs can be made in winter; others need a temporary fix until the weather allows a lasting one.
Thompson Falls, MT roof repair FAQ
How soon can you get to Thompson Falls?
Thompson Falls is about 26 miles from our base in Plains, the closest town we serve after Plains itself. Call or text 406-210-3168.
How much snow does Thompson Falls get?
About 15 inches in an average year, going by the Thompson Falls weather station (1991–2020 normals). Snow load, drifting, and melt water are what we check after a snowy stretch.
Does deep cold damage roofs in Thompson Falls?
It can. The record low at the Thompson Falls station is -25°F. Hard cold makes sealants brittle and makes metal panels shrink and pull at their fasteners, so cracks that start in winter often leak in spring.
Can restoring my Thompson Falls roof with a coating avoid a full tear-off?
In many cases. When the existing roof is still attached and mostly dry, restoration and a seamless roof coating can extend its life with less disruption and far less tear-off waste. A roof with widespread wet insulation or a damaged deck usually needs replacement instead.
Can a TPO or EPDM roof in Thompson Falls be repaired?
Yes. We repair open seams, punctures, failed flashing, and leaks on TPO, PVC, and EPDM roofs, including roofs we didn't install. If the membrane is still attached and mostly dry, a restoration coating can also extend its life.
Getting to Thompson Falls
Thompson Falls is about 26 road miles from our base in Plains, about 40 minutes by road (an estimate). We set inspection dates by distance and weather, and we will tell you honestly when we can be there.
Around Thompson Falls we also cover Belknap, Haugan, Saltese, De Borgia, Weeksville, and Trout Creek.
Nearby city pages: roof repair in Plains, roof repair in Kellogg, roof repair in Libby, roof repair in Polson, roof repair in Ronan.
Smaller towns around Thompson Falls are covered on our roof repair page for Northwest Montana.
Get your Thompson Falls roof looked at
We'll find the problem, show you photos, and tell you plainly what it needs.
