
Roof Repair in Anaconda, MT
Snow load, ice dams, and deep-cold cracking are what we see most on Anaconda roofs. We find where the water gets in and fix the cause.
Roof leaking right now? We take emergency calls and messages 24/7. Call or text 406-210-3168.
- First roof inspection free
- Leaks, storm & hail damage
- Commercial, ag & public buildings
- Based in Plains, Montana
A roofer who fixes the cause, not just the stain
Anaconda is the county seat of Deer Lodge County, which has a consolidated city-county government. At about 5,227 feet, Anaconda gets about 75 inches of snow and about 15 inches of total precipitation in an average year, going by the Anaconda weather station, and temperatures there have ranged from -38°F to 102°F. On Anaconda roofs we look first for snow load, ice dams, and deep-cold cracking, on the flat, low-slope, and metal roofs of commercial, ag, and public buildings.
Anaconda at a glance
- County: Deer Lodge County, Montana
- Population: 9,421 (2020 census)
- Elevation: about 5,227 feet
- From Plains: about 181 road miles
- Average snowfall: about 75 inches
- Average precipitation: about 15 inches
- Nearby towns we also cover: Racetrack, Walkerville, Deer Lodge, Butte, Philipsburg
Call or text 406-210-3168, Mon–Fri 8 AM–5 PM MT.
Commercial & ag buildings
Get your roof repair looked at in Anaconda
Rather talk? Call or text 406-210-3168 · Mon–Fri 8 AM–5 PM MT
Our work near Anaconda
These are real jobs, nearest to Anaconda first. Projects were led by Sam Hostetler, some before the Revive name.
- Restaurant in Martinsdale, MT (about 125 miles away): spray foam restoration after hail.
- Grain silos in Grangeville, ID (about 155 miles away): concrete roof restored with coating.
- County courthouse in Cut Bank, MT (about 175 miles away): repair and full-roof coating.
What Anaconda weather does to a roof
The damage we see most on roofs in Anaconda, and what we check for.
About 75 inches of snow
Anaconda averages about 75 inches of snow a year at the local station. At over 5,000 feet, snow stays on roofs for long stretches, and the weight and meltwater find weak seams and flashing.
Ice dams under the Pintlers
Snow sitting on heated buildings melts from below and refreezes at the eaves. Ice dams push water under roofing on older buildings with little attic ventilation.
Record low of -38°F
Anaconda has recorded -38°F. Hard cold cracks old sealant and flashing and makes metal panels pull at their fasteners.
Mountain storms and hail
Summer mountain storms can bring hail and wind. Hail dents metal and rooftop equipment, and wind loosens trim on exposed roofs.
Weather data: NOAA 1991–2020 normals, Anaconda station: about 75 inches of snow and about 15 inches of total precipitation in an average year; record low -38°F, record high 102°F.
Anaconda buildings, permits, and snow loads
Smelter-era brick buildings
Anaconda was built around the copper smelter, and many older brick buildings remain. Their roofs leak at parapet caps, chimneys, built-in gutters, and wall flashing.
Historic theaters and public buildings
Buildings like the Washoe Theater on Main Street have complex roof sections. Repairs on historic buildings have to fit the building and keep water out at every transition.
Shops and metal buildings
Metal shops and garages around town leak at screws, laps, and ridge caps, especially after a heavy snow year.
Anaconda is not on the state's list of certified local building programs, so commercial building permits there come from the Montana State Building Codes Bureau. We check permit needs with that office before larger work.
Montana leaves snow loads to the building official, with a 30 psf minimum design roof snow load, which matters in Anaconda when a recover or new rooftop unit adds weight.
Sources: Montana certified building programs · ARM 24.301.146 (snow loads).
Roof systems we repair in Anaconda
Every roof type fails in its own way. Here is what we look for on each kind of roof in Anaconda.
- Metal roof repair. loose screws, open laps, and rust on Anaconda shops and metal buildings.
- TPO roof repair. open seams, punctures, and pulled flashing on Anaconda commercial roofs.
- Membrane roof repair (EPDM and single-ply). EPDM rubber and other single-ply seams, edges, and boots.
- Spray foam roof repair. damaged foam and worn coating, repaired and recoated.
- Roof leak detection. tracing water in Anaconda buildings back to its source; paid moisture scans for big roofs.
- Flat roof repair. PVC, modified bitumen, and built-up roofs, drains, and ponding water in Anaconda.
- Roof restoration and roof coating. silicone or acrylic coating over a sound Anaconda roof instead of tear-off.
That includes commercial metal roof repair on standing seam and screw-down panels, rubber roof repair on EPDM, and recoating worn elastomeric and spray foam roofing.
Roof Restoration & Coatings in Anaconda
When the deck is sound and the roof is mostly dry, a roof restoration repairs the leaks and seals the surface with a roof coating instead of a tear-off. We see good restoration candidates on Anaconda buildings like smelter-era brick buildings and historic theaters and public buildings. That applies across Deer Lodge County.
With about 75 inches of snow a year in Anaconda, meltwater can sit on low-slope roofs for long stretches. Silicone roof coatings are often chosen for flat and low-slope roofs where some water sits after rain or snowmelt.
Learn more about restoration
Help for leaking and storm-damaged roofs in Anaconda
- Roof leak repair. Commercial roof leak repair in Anaconda starts with finding the source, not the drip. Leak service calls start at $250, and that amount is applied to the repair if you hire us.
- Hail, storm, and wind damage. Wind lifts edges and trim, and hail dents metal and cracks skylights.
- Emergency roof repair. Looking for 24 hour roof repair help in Anaconda? We take emergency calls and messages 24/7.
- Winter leaks and ice dams. Winter leaks in Anaconda often start at the eaves. If you were searching for ice dam removal, call or text first and we'll tell you plainly what can be done safely.
- Roof inspection. A roof inspection for a Anaconda building covers seams, flashing, penetrations, drains, and the edges.
Finding the leak and fixing it
How we trace a leak on a Anaconda roof
Commercial leaks often show up far from where they start. We go from the inside drip to the roof and check the usual sources: open seams, curbs, drains, flashing at walls and parapets, and loose or rusted fasteners.
You get photos of every problem and a written quote for each repair, listed in the order we'd fix them.
How a roof repair works, step by step
- Call, text, or send the form. Tell us what you're seeing and where.
- Free first inspection. We check the surface, seams, flashing, drains, and edges and take photos.
- Written quote. The specific fix and its cost, in plain language.
- The repair. We fix it, clean up, and send photos of the finished work.
Who we work for in Anaconda
Commercial, ag, and public buildings
Our roof repair work in Anaconda is focused on commercial, ag, and public buildings: flat, low-slope, membrane, coated, and metal roofs, with leaks at seams, curbs, drains, fasteners, and flashing.
Homes
For residential roof repair on a house in Anaconda, call or text 406-210-3168 first and we'll tell you plainly whether your address is in our residential area.
Repair, restore, or replace?
Fix the leaks first. Most flat and metal roofs can keep going for years with seams, drains, and flashing repaired properly.
When restoring or replacing makes more sense
When the problems are everywhere, the question becomes restore or replace. A roof moisture scan shows whether the insulation is dry enough to restore, and our coating vs. replacement page explains the trade-offs.
Anaconda, MT roof repair FAQ
How much snow can an Anaconda roof hold?
That depends on the building and how it was framed. If you see sagging, cracking, or doors that start sticking during heavy snow, call or text 406-210-3168. We'll look at the roof and tell you plainly what we see.
How far is Anaconda from you?
Anaconda is about 181 miles from our base in Plains, Montana, about 3 and a half hours by road (an estimate). Call or text 406-210-3168 and we'll tell you honestly when we can be there.
How much snow does Anaconda get?
About 75 inches in an average year, going by the Anaconda weather station (1991–2020 normals). Snow load, drifting, and melt water are what we check after a snowy stretch.
Can a roof coating or restoration extend the life of my Anaconda roof instead of tearing it off?
Often, yes, if the deck is sound and most of the roof is dry. We repair leaks and small wet areas, then seal the roof with a silicone or acrylic coating. If moisture is trapped across large parts of the roof, replacement is usually the better choice, and we'll tell you. See roof coating vs. replacement.
Is a roof inspection free in Anaconda?
Your first roof inspection is free, with no obligation. A roof moisture scan is a separate, paid service for larger roofs. Good times to inspect are after a hard winter, after hail or wind, and before you budget for a coating or a new roof.
Getting to Anaconda
Anaconda is about 181 road miles from our base in Plains, about 3 and a half hours by road (an estimate). We set inspection dates by distance and weather, and we will tell you honestly when we can be there.
Around Anaconda we also cover Racetrack, Walkerville, Deer Lodge, Butte, Philipsburg, and Wise River.
Nearby city pages: roof repair in Deer Lodge, roof repair in Butte, roof repair in Helena, roof repair in Hamilton, roof repair in Stevensville.
Smaller towns around Anaconda are covered on our roof repair page for Southwest Montana.
Get your Anaconda roof looked at
We'll find the problem, show you photos, and tell you plainly what it needs.
